 Site Links
Flat Panels
Rear-Projection TV Front Projectors Receivers HT in a Box Speakers Recently Added
Video Displays
All In One HT
Speakers
Sources
Electronics
Other Hardware
Custom Install
Software Hook Me Up HT Talks To Boot Camp Advice From the Experts Ask Home Theater Shane Buettner Mark Fleischmann Audio/Video News CEDIA 2009 CES 2009 CEDIA 2008 CES 2008 CEDIA 2007 HE 2007 CES 2007 CEDIA 2006 AV Links HT Galleries A/V Glossary Contact Us Customer Service New Subscription Digital HT Renew Give a Gift Sub Services Flatscreen TVs LCD TVs Plasma TVs HDTV AV Receivers Home Theater in a Box Digital Projectors DLP Projectors Video Projectors Surround Sound Dolby 5.1 |
 |
|
|
Totem Acoustic Tribe III On-Wall Speaker System:
HT Labs Measures: Totem Acoustic Tribe III On-Wall Speaker System
Satellite Sensitivity: 86.5 dB from 500 Hz to 2 kHz This graph shows the quasi-anechoic (employing close-miking of all woofers) frequency response of the Tribe III satellite (purple trace) and Storm subwoofer (blue trace). The passive loudspeaker was measured with grille at a distance of 1 meter with a 2.83-volt input. The Tribe III's listening-window response (a five-point average of axial and +/–15-degree horizontal and vertical responses) measures +1.42/–4.22 decibels from 200 hertz to 10 kilohertz. An average of axial and +/–15-degree horizontal responses, in horizontal mode, measures +1.30/–6.20 dB from 200 Hz to 10 kHz. The –3-dB point is at 62 Hz, and the –6-dB point is at 57 Hz. Impedance reaches a minimum of 5.54 ohms at 244 Hz and a phase angle of –44.50 degrees at 110 Hz. The Storm's close-miked response, normalized to the level at 80 Hz, indicates that the lower –3-dB point is at 37 Hz and the –6-dB point is at 35 Hz. The upper –3-dB point is at 70 Hz with the Crossover switch set to Disabled.—MJP
|
|
|
|
 Sponsored Technology Center
|
||||||||||||||||||||||||||||||||
